适配器
$分销商可见
- 产品描述
| 产品尺寸 | 长: 22.00cm | 宽: 15.50cm | 高: 2.00cm | 产品重量 | 0.065kg |
| 包装尺寸 | 长: 22.00cm | 宽: 15.50cm | 高: 2.00cm | 包装重量 | 0.065kg |
冰箱加热片
Fixes the following symptoms:
...Refrigerator Won't Cool in Garage
...Freezer section too warm.
...Freezer section too warm.
Installation step instructions （Before working on your appliance, make sure that it is unplugged.）
① Unplug the refrigerator from electrical oulet.
② Remove 4 screws holding control box to cabinet. Unplug the Molex connector.
③ Remove 2 screws holding defrost timer to control box. Pull back defrost timer.
④ Bend the heater into a U shape. Peel off the paper backing of heater.
⑤ Align heater holes with defrost timer mounting pegs. Place heater against control box and press down over full surface of heater.
⑥ Set defrost timer back into position and screw in place.
⑦ Unplug 2 leads from cold control(Orange and Black wires).
⑧ Plug orange lead to orange heater lead, then back onto cold control. Plug black lead to blace heater lead, then back to cold control.
⑨ Reinstall cold control box by first plugging in Molex connector. Screw control box back into refrigerator cabinet using 4 screws you removed ealier. Plug refrigerator into electrical outlet.
⑩ Check out the installation video on YouTube and you'll find it very easy to install this refrigerator garage heater kit.
② Remove 4 screws holding control box to cabinet. Unplug the Molex connector.
③ Remove 2 screws holding defrost timer to control box. Pull back defrost timer.
④ Bend the heater into a U shape. Peel off the paper backing of heater.
⑤ Align heater holes with defrost timer mounting pegs. Place heater against control box and press down over full surface of heater.
⑥ Set defrost timer back into position and screw in place.
⑦ Unplug 2 leads from cold control(Orange and Black wires).
⑧ Plug orange lead to orange heater lead, then back onto cold control. Plug black lead to blace heater lead, then back to cold control.
⑨ Reinstall cold control box by first plugging in Molex connector. Screw control box back into refrigerator cabinet using 4 screws you removed ealier. Plug refrigerator into electrical outlet.
⑩ Check out the installation video on YouTube and you'll find it very easy to install this refrigerator garage heater kit.
Please note:
❄Non original part,but meets OEM standards.
❄Non original part,but meets OEM standards.
❄This heater kit will NOT work on Frigidaire refrigerators manufactured prior to 2001, on side-by-side or counter-depth models, or on models with electronic controls.
冰箱加热片
